1LF Hydraulic Reversible Mouldboard Plough for 50-120HP Tractors

The BSM 1LF hydraulic reversible mouldboard plough is designed for agricultural tractors from 50HP to 120HP. It is suitable for primary tillage, deep ploughing, soil inversion, crop residue burial and farmland preparation before planting.

The hydraulic reversing system allows the plough body to rotate at the end of each pass. This helps the tractor continue ploughing in the opposite direction while turning the soil toward a consistent side, reducing open furrows and improving field surface uniformity.

The main product range includes 3-furrow, 4-furrow and 5-furrow configurations. Customers can select a 300mm or 350mm single-furrow working width according to tractor power, soil resistance, required working depth and field conditions.

• Primary tillage before crop planting
• Deep ploughing of cultivated farmland
• Turning and loosening compacted soil
• Burying crop residues and surface weeds
• Improving soil aeration and water infiltration
• Preparing fields for maize, wheat, soybean, cotton and other crops

During operation, the mouldboards cut, lift, break and turn the soil. After completing one pass, the operator activates the tractor hydraulic system to rotate the plough frame. The opposite set of plough bodies then enters the soil for the return pass.

This reversible working method helps reduce dead furrows and back furrows. It is especially useful for rectangular fields, medium and large farms, and operations that require a more even field surface after ploughing.

• Hydraulic reversing system: The plough frame can be reversed through the tractor hydraulic system for efficient two-direction operation.
• 3-5 furrow configurations: Different models are available for tractors from approximately 50HP to 120HP.
• Two furrow-width options: The 1LF series includes 300mm and 350mm single-furrow working widths.
• Deep working performance: Selected models provide a working depth of approximately 200-350mm.
• Standard three-point linkage: The plough is mounted to a compatible agricultural tractor through a standard three-point hitch.
• Strong soil inversion: The mouldboard structure helps lift, break and completely turn the soil.
• Suitable for different soil conditions: The plough can be configured for loam, clay soil, dry farmland and cultivated fields.
• OEM customization: BSM can provide customized color, logo, model combination and export packaging.

Parameter source: The model, working width, working depth, matched power and machine weight shown above are based on the BSM 1LF hydraulic furrow plough catalogue.

Tractor selection should not be based only on engine horsepower. The final configuration should also consider tractor operating weight, hydraulic lifting capacity, traction force, rear three-point hitch capacity, hydraulic outlet type, soil hardness, field slope and required working depth.

A tractor with suitable rear lifting capacity and a compatible double-acting hydraulic outlet is recommended. Because the plough weight is positioned behind the tractor, adequate safety allowance must be retained when checking hydraulic lifting capacity.

Front counterweights may be required when operating larger 4-furrow or 5-furrow models. Final counterweight configuration should be confirmed according to tractor weight distribution and field conditions.

• Lower working resistance under similar conditions
• Suitable for tractors with limited traction capacity
• Good choice for heavier or more compact soil
• Available in models such as 1LF-330, 1LF-430 and 1LF-530

• Provides a wider total working width
• Improves field coverage per pass
• Requires greater traction under the same working depth
• Available in models such as 1LF-435 and 1LF-535

• Reduces open furrows after field operation
• Produces a more uniform field surface
• Allows continuous return-pass ploughing
• Improves working efficiency on larger fields
• Provides strong soil inversion and residue burial
• Suitable for coordinated tractor and implement solutions

• Agricultural tractor and implement supply from one source
• Model selection according to tractor specifications
• Support for OEM color and logo customization
• Spare parts and wearing parts support
• Export packaging and international shipping solutions
• Experience serving customers in Africa and South America

The main models on this page are designed for tractors from approximately 50HP to 120HP. The final model should be selected according to tractor power, operating weight, lifting force, traction capacity and soil conditions.

Both models have four furrows. The 1LF-430 has a 300mm single-furrow width and a total working width of 1200mm. The 1LF-435 has a 350mm single-furrow width and a total working width of 1400mm.

A suitable 70HP tractor may operate the 1LF-330 or 1LF-430 under normal soil conditions. Final matching depends on tractor weight, rear lifting capacity, traction force and soil resistance.

The 1LF-435 or 1LF-530 may be considered for a 100HP 4WD tractor. The 1LF-435 is suitable for wider four-furrow work, while the 1LF-530 provides five-furrow operation.

Yes. The hydraulic reversing mechanism must be connected to a compatible tractor hydraulic outlet. A double-acting hydraulic outlet is generally recommended, subject to the final cylinder and hose configuration.

Yes. BSM can recommend a tractor and plough combination according to the required working width, soil type, working depth, farm area and destination country.

Please provide the required number of furrows, tractor model, tractor horsepower, rear lifting capacity, hydraulic outlet type, soil condition, required working depth, destination country and purchase quantity.

BSM will recommend a suitable 1LF hydraulic reversible mouldboard plough model and provide a factory quotation.